EMBODIED CARBON IN CEMENT The cement industry accounts for 8% of global greenhouse emissions. And although cement comprises 10-15% of the overall concrete mixture weight, it makes up 80-85% of the mixture’s overall carbon emissions. The key to achieving reduced carbon concrete is through minimizing the amount of cement needed or replacing that cement with other materials while meeting the same performance requirements. The main source of carbon emissions from concrete production is associated with the energy-intensive processes used in order to create clinker, the major ingredient in cement. The other part is simple chemistry — carbon dioxide, a greenhouse gas, is directly released as a product of the chemical reaction while creating clinker. Although there are efforts on the supplier side to adopt alternate manufacturing processes, these are not yet commercially available, so our biggest opportunity to reduce embodied carbon today is to minimize the amount of cement needed from a design and procurement standpoint. However, the materials we’ve traditionally used to replace cement are byproducts of high-energy processes like burning coal or smelting steel, and these are becoming limited. To meet demand, these byproducts are increasingly being imported, adding even more to their mixture’s carbon footprint. On the other hand, suppliers across the country are starting to reduce their reliance on conventional byproducts by utilizing new materials such as Portland limestone cement, ground glass and natural pozzolans to replace cement while meeting similar performance requirements. Looking ahead, new technologies designed to address the main issues of CO2 off-gas and high energy demand during cement production are on the rise. Although most of these technologies are not yet widely available, companies like Sublime, Brimstone, Blue Planet and Heidelberg are actively increasing access to reduced carbon concrete solutions through alternate cement production methods and carbon capture in the near future, which is good news. STEPS TO TAKE During design, it’s important to coordinate column grid layouts and loading in a way that optimizes the structural systems and reduces the concrete needed overall. For multistory buildings, floors usually require the most material and contribute significant portions of the overall embodied carbon. There are several different materials and framing layouts engineers can utilize, but they are highly dependent on construction types and practices that are most conducive to the project type and cost-effective in the region. In the case of concrete, cement content is directly tied to compressive strength, so it’s good practice to try and reduce strength of concrete elements as much as possible while keeping in mind the minimum strength requirements dictated by potential exposure classes. However, it’s also important to keep in mind that this relationship is not so straightforward when introducing reinforcement for high demand concrete elements. There are several different ways to design reinforced concrete elements so the structural engineer should consider the optimal way for these materials to work in tandem while balancing the goals of the project. PERFORMANCE-BASED SPECIFICATIONS Once the performance criteria for concrete is finalized by the design and construction teams, the next step is to coordinate with the suppliers and encourage further mix design optimization. We can coordinate with suppliers to optimize cement in the mixture, but we must be mindful and adhere to their comfort level with quality assurance. It’s also important to keep in mind that not every supplier has unlimited slag, fly ash or whatever cool technology you’ve heard about recently. So weighing the impact these strategies have through comparison of Environmental Product Declarations (EPD) is a must. And here’s why: EPDs are like nutrition labels for building materials, with the Global Warming Potential (GWP) or embodied carbon being our “calories.” GWP limits can be utilized in specifications to ensure compliance with policy or project requirements, but the best way to ensure the lowest carbon mixture is procured at an economical price point is through coordinating directly with the supplier, general contractor and the design team to spur optimization. If coordinated routinely throughout the design and procurement process, there is a high chance of achieving cost-neutral reduced carbon concrete or even saving costs through the reduction of cement. For more information on reducing embodied carbon, contact Jessica Martinez, structural sustainability specialist with DCI Engineers at jmartinez@dci-engineers.com. 35
RkJQdWJsaXNoZXIy MTg3NDExNQ==