13 Recommended: These treatments are appropriate for the type and severity of a distress. However, it is important to confer with a professional about your existing conditions. (See list of contractors in the back of this booklet.) Not Recommended: These treatments are not appropriate for the type and severity of a distress. Feasible: These treatments are acceptable but not the best choice, either because they don’t fully address the problem or because they go beyond what is needed to address the problem. Severity of Transverse Cracking Preservation Treatments LOW (Very Mild) MEDIUM (Noticeable, but Not Extensive) HIGH (Extensive in Most Locations) Crack Sealing RECOMMENDED RECOMMENDED RECOMMENDED Hot Pour Mastic/Patch FEASIBLE RECOMMENDED RECOMMENDED Spray Applied Preservation FEASIBLE FEASIBLE NOT RECOMMENDED Seal Coat FEASIBLE FEASIBLE NOT RECOMMENDED Fog Seal/ Rejuvenator FEASIBLE FEASIBLE NOT RECOMMENDED Sand Seal RECOMMENDED RECOMMENDED FEASIBLE Scrub Seal RECOMMENDED RECOMMENDED FEASIBLE Spot Repair NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED Slurry Seal RECOMMENDED FEASIBLE FEASIBLE Chip Seal RECOMMENDED FEASIBLE FEASIBLE Micro-Surfacing RECOMMENDED FEASIBLE FEASIBLE Cape Seal RECOMMENDED FEASIBLE FEASIBLE MAINTENANCE AND REHAB OPTIONS Cold In-Place Recycling (CIR) FEASIBLE RECOMMENDED FEASIBLE Hot In-Place Recycling (HIR) FEASIBLE RECOMMENDED FEASIBLE Hot Mix Asphalt (HMA) Overlay (Less than 2”) FEASIBLE FEASIBLE RECOMMENDED Bonded Wearing Course (BWC) (Less than 1”) FEASIBLE FEASIBLE FEASIBLE Ultra-Thin HMA (0.5” - 1.0”) FEASIBLE NOT RECOMMENDED NOT RECOMMENDED
RkJQdWJsaXNoZXIy ODQxMjUw